Most popular

Is there hydraulic lockout on a caterpillar telehandler?

Is there hydraulic lockout on a caterpillar telehandler? Hydraulic lockout is something we hear from telehandler operators all the time, so we know how it’s regarded as a huge nuisance on most farms. It’s why Caterpillar sought to provide an in-built solution to this problem. All Cat ® Telehandlers feature an intelligent LSI system, featuring "passive" and "active" modes. When does a cat telehandler go into passive mode? When the machine is in-gear with the park brake disengaged, Cat Telehandlers enter passive mode. This means the LSI sensor will alert the operator to potential instability, but won’t lock out the...
Easy lifehacks

How much does a Kubota kx121-2 excavator cost?

How much does a Kubota kx121-2 excavator cost? The production stopped in 2002, where this KX 121-2 was available at a new list price between €48000 and €61000. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system. At present, 39 other mini excavators, which range from 1t up to 5.5t are produced by Kubota. What are the main components of a kx121-3 excavator? The KX121-3S is a breeze to maintain. The side and rear covers open wide and the main components are centrally located, giving you quick and easy access to all vital...
Most popular

Which is John Deere 350 crawler loader manual?

Which is John Deere 350 crawler loader manual? John Deere MODEL: 350 Crawler Loader Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL. Is the John Deere 350 series bulldozer rebuilt? In addition to new parts we also have used and rebuilt parts and components for the John Deere 350 series. Call us to learn more. The John Deere 350 series bulldozer proves that great things often come in smaller packages. What...
Other

Is the Komatsu pc50uu-1 a hydraulic machine?

Is the Komatsu pc50uu-1 a hydraulic machine? I've got a 1993 Komatsu PC50UU-1 gray market machine. I've got the pdf manual for it. It's got a hydraulic problem that I've been unable to figure out. This machine is a direct hydraulic machine, no electronics, solenoids, etc. in the hydraulic circuit. I believe it uses a gear pump. Why does my Komatsu pc50uu-1 swing slow down? The swing feels normal with no load, but slows down as the oil heats up and is weak. The blade does not drift. If I lift the front with the boom, then put the blade...
Easy tips

What motor is in a Ford L9000?

What motor is in a Ford L9000? Engine. The engine of the Ford L9000 is a Caterpillar engine model 3306DSL. This diesel engine is capable of producing a peak horsepower rating of 300. When was the caterpillar Cat 3208 diesel engine made? Originally produced in 1975 through a collaboration between Caterpillar and Ford, the Cat 3208 diesel engine was extremely popular through its entire production run, which lasted into the early 1990s. The engine was used in heavy trucks, including tractor trailers, garbage trucks, school buses and construction ... Are there any Ford l8000 dump trucks for sale? The New...
Most popular

How much does it cost to replace a torque amplifier?

How much does it cost to replace a torque amplifier? The TA has two ranges, high range and low range. If it goes out it can go out on only the low range, it can go out only on the high range and it can go completly out. The cost to replace the TA is in the $2000.00 range. There is a TA elimination kit you can purchase. Usually the low side is out. Do you need a torque amplifier on a tractor? Unless you are going to use the tractor for something that would require more speed selections or...
Common questions

What year is a 315 New Holland baler?

What year is a 315 New Holland baler? Just need to remember that the 315 was manufactured between 1976 - 1982, so it is at least thirty years old. Depending on how it was operated and maintained, it can be a dependable baler with years of service left in it - or a money pit that will cause you to pull your hair out. How much horsepower do you need to run a square baler? 35 horsepower Most standard square balers on the market require 35 horsepower at your tractor's PTO, and a minimum tractor weight of around 3000 pounds....
Easy tips

How do you excite an AC Delco alternator?

How do you excite an AC Delco alternator? Take a small piece of wire and touch one end of it to the battery alternator terminal. Then touch the other end to the small "R" terminal. (Note: This may create a small spark, which is normal.) Remove the wire and start the vehicle. Can a Delco Remy alternator be removed before auto start? If you’ve installed an alternator and it won’t charge, don’t remove it just yet. Here’s why: most Delco Remy alternators have "Auto Start" capability that doesn’t require a separate wire to excite the alternator to charge. What happens...
Easy lifehacks

What RPM should my truck shift at?

What RPM should my truck shift at? Shift gears between 2,000 and 2,500 RPM for optimal engine efficiency. Allowing the RPM to go up to 3,000 RPM or higher increases speed but makes the engine work harder, which reduces fuel economy. What is a 13 speed? Trucks using 13-speed transmissions allow certain gears to have high and low settings, so you'll use the same gear position more than once after pushing a button to change the setting. With a 13-speed transmission, the gears are closer together than in a 10-speed transmission, for example. What is the horsepower of a cat...
Easy lifehacks

What does Husco manufacture?

What does Husco manufacture? Husco is a privately-owned company specializing in high performance hydraulic and electro-mechanical components. We have over 30 years of experience designing and manufacturing components for Automotive and Off-Highway applications, and we pride ourselves on our collaborative relationships with our customers. What does Husco stand for? Hydraulic Unit Specialty Company The name HUSCO is an acronym that stands for Hydraulic Unit Specialty Company. Inherent in this name is the core of our business model: developing innovative, customized hydraulic solutions that improve the overall efficiency, controllability and performance of automotive and off-highway mobile equipment. Who are Husco? Innovative...