Easy lifehacks

How much is a windshield for a 2005 Chevy Trailblazer?

How much is a windshield for a 2005 Chevy Trailblazer? RECENT QUOTESVehiclePartQuote2005 Chevrolet TrailblazerWindshield$302.732005 Chevrolet TrailblazerWindshield$302.202006 Chevrolet TrailblazerWindshield$302.202002 Chevrolet TrailblazerWindshield$274.52 Who is the owner of the 2005 TrailBlazer? 2005 Chevrolet TrailBlazer/TrailBlazer EXT Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the names TRAILBLAZER and TRAILBLAZER EXT are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. When did the Chevrolet TrailBlazer EXT come out? Chevrolet’s midsize TrailBlazer sport utility vehicle debuted early in 2002 as a five-passenger vehicle and was soon joined by an extended-length TrailBlazer...
Most popular

What kind of intake manifold does a Chevy use?

What kind of intake manifold does a Chevy use? PARTS INTENDED FOR COMPETITION USE ONLY. Click for more details. PARTS INTENDED FOR COMPETITION USE ONLY. Click for more details. The wide range of Chevrolet Performance intake manifolds are cast-iron and aluminum for carbureted and fuel injected applications. What kind of gasket do I need for a small block intake manifold? Runners in heads and manifold must be matched by engine builder. Often, the gasket will line up with the top of the port so removal is required at the bottom of the port. Gaskets that can be used with this...
Most popular

How much horsepower does a Holley 1050 Dominator have?

How much horsepower does a Holley 1050 Dominator have? This engine produces 710 hp and 665 ft-lbs with drivability right off a 700-rpm idle, and it runs on service-station pump fuel. To get these results, the 1050 Dominator calibrations were given a great deal of attention at WOT and at part throttle/idle. What kind of carburetor does Holley bigblock 482 use? The 1050 Dominator on this low-buck street Chevy bigblock 482 was ordered from Holley based on the engine spec. It required minimal jetting to make 650 hp and 636 ft-lbs. Carefully choose a head and manifold that have cross-sectional...
Common questions

What does it mean when your spark plugs keep fouling out?

What does it mean when your spark plugs keep fouling out? If your spark plugs are fouling and keep fouling out, you probably have an engine problem. Normal spark plug deposits are typically light tan or brown in color. Black deposits or heavy ash deposits usually indicates trouble. Why does my spark plugs keep cracking in my equinox? Your spark plug cracking maybe due to what they call pre ignition ((IF)) this is the fact it could also be hurting your engine over a prolong time preignition could cause the top of pistons to fail Sign in to reply Get...
Common questions

Is the location of the spark plug important?

Is the location of the spark plug important? Yes definitely the position of spark plug matters a lot in the performance of the engine during combustion. There are three points which are to be considered while designing an engine. Spark plug is to be located at the center of the cylinder head in order to have shorter flame travel which ultimately reduces... Why is the spark plug away from the intake valve? So spark plug located in such a way that it results in optimized combustion. Like in many of the Combustion chamber has spark plug away from intake valve...
Other

Are all d16 head gaskets the same?

Are all d16 head gaskets the same? They are all the same. What's the best way to replace a cylinder head gasket? If applicable, spray both sides of the cylinder head gasket with the sealer before laying it onto the clean engine block. Otherwise, lay the bare gasket onto the clean engine block. Tip: Many vendors sell a copper sealant spray to help ensure a good seal when a new cylinder head gasket is installed. How much does a head gasket replacement cost? The labor time to replace the cylinder head is 14.8 hours. This engine uses a timing chain...
Easy lifehacks

Why does my Chevy truck vibrate at 65 mph?

Why does my Chevy truck vibrate at 65 mph? “Since about 15,000-18,000 miles, this truck vibrates at most speeds, most noticeable at 65 mph and over,” reads another complaint on the NHTSA database. “It is at the dealer for the second time. The first time all they did was balance the tires, but the problem didn’t go away. When did Chevy Silverado High Country Crew Cab shake? We spoke with one Chevy customer, Nicholas Maratea, who purchased a 2014 Silverado High Country Crew Cab with the 5.3-liter V8 and 20-inch wheels on October 23, 2014. On a warm day in...
Easy lifehacks

How big is the fuel tank on a Chevy 3500?

How big is the fuel tank on a Chevy 3500? Click to expand... 2019 3500 pickups have 36 gal tanks. I was just reading the new GM TECHLINK newsletter. It has an article concerning the 15-19 trucks with dual tanks. Has to do with dirt on top of the rear tank blocking the tank vent fitting. What kind of truck has dual fuel tanks? The work truck I'm issued is a 2015 3500 chassis cab with the dual tanks. I had the same problem twice with the fuel guage dropping to E and the truck only pulling from the front...
Easy lifehacks

How much did a Chevy Silverado cost in 2009?

How much did a Chevy Silverado cost in 2009? The 2009 Chevrolet Silverado has a Manufacturer's Suggested Retail Price (MSRP) starting around $19,000 for a base two-wheel drive Regular Cab, a somewhat spartan work truck. When did the Chevy Silverado 2500HD come out? 1st owner purchased on 12/21/09 and owned in NY until 12/11/12 • 2nd owner purchased on 01/24/13 and owned in NY until 04/24/21. 1st owner drove an estimated 3,441 miles/year • 2nd owner drove an estimated 5,504 miles/year. What kind of car is a Chevy Silverado? Autotrader has 8,539 Used Chevrolet Silverado 2500 cars for sale, including...
Easy tips

Can you upgrade trunnions on your LS rocker arms?

Can you upgrade trunnions on your LS rocker arms? On the left is a rocker arm with the Comp Cams trunnion upgrade kit installed, on the right a bone stock factory rocker arm. The factory trunnion setup uses a stamped cap to keep the trunnion and bearings in place. Which is better factory rocker arm or trunnion bushing? In our opinion, the factory rocker arm is good up to 7,500 rpm, but even there you’re flirting with danger. While our trunnion bushings won’t allow for higher revs, they’re a precautionary upgrade – they improve reliability at the upper end of...