Most popular

What to do if you have too much oil in your engine?

What to do if you have too much oil in your engine? If you have noticed any of the above symptoms, it is likely that there is too much engine oil in reserve and steps should be taken to fix the problem. To ensure that there is excess oil, stop your car somewhere safe and shut off the engine. Open the hood and check the dipstick oil level to see the oil stain. What should I do if my engine oil starts to drip? Raise your car to some height then crawl underneath and locate the plug. Place the plastic...
Easy tips

What kind of transmission fluid does a 2000 f350 take?

What kind of transmission fluid does a 2000 f350 take? The type of transmission fluid that should be used in the 2000 Ford F-350 is Mercon V. How to check the transmission fluid level in a Ford F-250? Transmission Fluid Level Check Ford F-250 Super Duty (1999-2007) - 2002 Ford F-250 Super Duty Lariat 7.3L V8 Turbo Diesel Extended Cab Pickup (4 Door) See how to correctly check the transmission fluid level in a 2002 Ford F-250 Super Duty Lariat 7.3L V8 Turbo Diesel Extended Cab Pickup (4 Door). What kind of transmission fluid does a Ford truck use? ORIGINAL...
Other

What kind of CVT does a 2007 Freestyle have?

What kind of CVT does a 2007 Freestyle have? Steve - In 2005 the AWD had the CVT but the front wheel drives have a 5 speed automatic. The (job2) 2007 Freestyle with the 3.5 engine will have a six speed, no more CVT. "In 2005 the AWD had the CVT but the front wheel drives have a 5 speed automatic." What kind of warranty does Ford Freestyle have? The dealer provided a rental car which just happened to be a 2006 Freestyle. Ford Customer Service agreed to provide a 5 year (starts on original purchase date) or 75,000 mile...
Easy lifehacks

What kind of sealer do you use on SBC head bolts?

What kind of sealer do you use on SBC head bolts? Permatex does have teflon thread sealer too and that's what I used last time. Prior to that always Permatex #2, same same both worked. I usually just run a 3/8" strip around the threads, about 1/4" from the end. Just a slight coating. What's everyone using to seal the threads on the head bolts? Discussion in ' Engine Topic ' started by garyandcindy, Oct 31, 2012 . What's everyone using to seal the threads on the head bolts?Also do you just put something on about the first 1/2" or...
Common questions

How much does a 2004 Ford F-150 weigh?

How much does a 2004 Ford F-150 weigh? The specifications seem to bear this out. We logged the most miles in a 2004 Lariat SuperCab 4×2, which has a curb weight of 5,244 pounds. A 2003 version, which also features a 5.4-liter Triton V-8 and an automatic transmission, weighs 4,613 pounds, according to Ford’s specs. This is no small weight gain. How big is the cargo bed in a 2004 Ford F-150? As always, SuperCrews come with 5.5-foot cargo beds, and regular cabs and SuperCabs come with 6.5- and 8-foot cargo beds. For the first time, the 2004 SuperCab also...
Other

What causes transmission problems in a Ford Mustang?

What causes transmission problems in a Ford Mustang? Ford has acknowledged several issues including thick, cold transmission fluid, high RPM operation, gear clash, faulty operation, and clutch plate bolt failure. The aftermarket and Mustang owners have identified fixes for all of these issues to improve function and performance of the transmission. Is there a shifter on a Mustang GT? MGW designed a shifter that is “solid-mounted” to the transmission and completely eliminates any shifter connection to the body. It is essentially floating with the transmission and is supported by heavy-duty brackets that tie on to the transmission case. The part...
Most popular

What code is po171 ford ranger?

What code is po171 ford ranger? A Ford P0171 is a LEAN code for cylinder bank 1, and P0174 is a LEAN code for cylinder bank 2. These codes commonly occur on many Ford vehicles, and are set when the powertrain control module (PCM) sees the air/fuel mixture is running too lean (too much air, not enough fuel). What is po171 code for ford? What Does P0171 Mean For Your Ford? Combustion engines run most efficiently when they maintain an air-fuel mixture ratio of 14.7 parts air to 1 part fuel. When there are more than 14.7 parts air to...
Easy tips

Can hydrogen be used to generate electricity?

Can hydrogen be used to generate electricity? Hydrogen is an energy carrier, not an energy source and can deliver or store a tremendous amount of energy. Hydrogen can be used in fuel cells to generate electricity, or power and heat. What is wrong with hydrogen energy? Also, hydrogen gas is nontoxic. Yet hydrogen has its own major safety issues. It is highly flammable, with an ignition energy that is 20 times smaller than that of natural gas or gasoline. Hydrogen can cause many metals, including the carbon steel widely used in gas pipelines, to become brittle. How does hydrogen work...
Most popular

Can you reuse factory head bolts?

Can you reuse factory head bolts? A head bolt should not be reused if the threads are galled or badly damaged. Chasing damaged head bolt threads with a die will clean up the threads but also remove material (metal) and undermine the head bolt's ability to torque down and hold to specs. How are head bolts and head gaskets related? The relationship between head gaskets and head bolts is an intimate one. The clamping load applied by the head bolts is what allows the head gasket to maintain its seal. For this marriage to last, there has to be constant...
Easy lifehacks

What is EEC power relay?

What is EEC power relay? The EEC Power Relay not only supplies battery voltage to the fuel injection computer (also known as the E.E.C. Electronic Control Assembly), but also supplies power to the fuel injectors, the fuel pump relay, and a few other emissions related solenoids. stands for, it's: Electronic Engine Control. Where does the power come from on a Ford EEC relay? This voltage comes from the ignition switch. Power (in the form of 10 to 12 Volts) is always present in circuit 4 . This voltage comes directly from the battery positive terminal across a fusible link on...