Most popular

Is Butte Montana worth visiting?

Is Butte Montana worth visiting? This is one of the few museums in the world located on an actual mine yard, and it's a place where history comes to life. Butte's many events, concerts and festivals encourage the kind of community bonding Montana is known for. It's impossible to visit Butte without feeling a sense of nostalgia. Is Great Falls MT a safe place to live? Great Falls ranks #3 in safety among Montana's cities. Both cities recorded violent crime rates above 4.8 per 1,000 as well as correspondingly high property crime rates. How many miles is it from Great...
Other

How many minutes is a 13 mile drive?

How many minutes is a 13 mile drive? So 13 miles would take you roughly 8.2 minutes. How long of a drive is 12 miles? 2 Answers By Expert Tutors Therefore, if you travel 1 mile, it is going to take 60/40=1.5 minutes. Travel 12 miles will be 12*1.5=18 minutes. How long does 15 miles take to drive? The time to drive 15 miles is 15 miles / 1.1667 miles/minute = 12.8571428571 minutes. 70 miles is driven in 60 min. Therefore to drive 15 miles will take (60 x 15)/70 min. How long of a drive is 14 miles? Question...
Most popular

Can you use DOT 3 brake fluid for steering?

Can you use DOT 3 brake fluid for steering? So, if you’re wondering if you can use your unopened DOT 3 brake fluid to power your steering, perhaps because of their lubrication abilities, the answer is NO. Despite the brake and the power steering fluids being hydraulic fluids, they are two different hydraulic fluids with different properties. What's the viscosity of DOT 3 brake fluid? Regarding viscosity, DOT 3 brake fluid has a relatively low viscosity of 1500 at -40F while DOT 4 has a viscosity of 1800 at the same temperature. Are all DOT 3 brake fluids compatible? No,...
Other

How do you install a crankshaft sensor?

How do you install a crankshaft sensor? Let's Get StartedDisconnect the Battery. Clear Access to the Sensor. Inspect the Sensor Location. Release the Electrical Connector. Remove the Sensor Mount Bolt. Remove the Sensor. Match the New Crankshaft Sensor. Installing the New Crank Position Sensor. How do you replace a crankshaft position sensor? Remove the two crankshaft position sensor bolts with the appropriate-size socket wrench attachment. Pull the sensor off to remove it. Install the new sensor in its place and tighten the two bolts with your socket wrench. Plug the electrical connection into the crankshaft position sensor. Re-attach the air...
Common questions

Does Jiffy Lube really change your oil?

Does Jiffy Lube really change your oil? Jiffy Lube services range from tire care to glass repair. But the most well known Jiffy Lube Service is their Signature Oil Change, which includes new oil, oil filter, a fluid top off, and a vehicle inspection, as do most standard oil changes. Who is the parent company of Jiffy Lube? Pennzoil bought out Jiffy Lube International For a second time, Jiffy Lube changed its owners. It was acquired by Pennzoil and became a subsidiary. The purchase took place in 1991. They would remain under the umbrella of their new parent company up...
Easy tips

Can I add a second tank to my air compressor?

Can I add a second tank to my air compressor? Yes, you can couple two tanks together to make a bigger reservoir. When the compressor runs, air flows from the piston (assuming it's a reciprocating compressor) through a tube into the tank. In this way, air goes into both tanks from the compressor, and can't flow back up the line to the unloader valve exhaust port. How do you connect two tanks together? Connecting Multiple Water TanksAlign tank overflows. First, align the heights of your tank overflows. Link the lowest outlets. Link the lowest outlet of each tank with suitable...
Easy tips

What size shock spring do I need?

What size shock spring do I need? For example, if your shock stroke is 2″, your max spring free length is 130mm and your spring rate is 450lbs, you need a spring that is 2.25″ x 450Lbs x 125mm (if you don't see a spring that has the exact stroke of your shock you can use a spring with a longer stroke, as long as the free length will fit). Can you put bigger springs on stock shocks? 285's will fit in the rear without any modifications. Your stock front Upper Control Arms will accommodate 2 inches of lift. Using...
Common questions

How many spark plugs does a 2006 Dodge Ram 1500 5.7 HEMI have?

How many spark plugs does a 2006 Dodge Ram 1500 5.7 HEMI have? There are two spark plugs per cylinder in a HEMI V8 engine. Which is the best coil pack for Hemi engine? The Sultans Of Spark, from Performance Distributors, are a direct replacement for the stock COPs, but offer up to 50% more spark. When the spark plug gets its juice from the factory coil, there is an inherent current loss that occurs when the spark travels down the coiled wire inside the COP. What kind of spark plugs do I need for my Hemi? Spark plugs with...
Easy tips

How many turns are in a tour and Andersson valve?

How many turns are in a tour and Andersson valve? Valves 2 ½ "/65 mm) and larger have 8, 12 or 16 turns. • A 90° fully open to closed valve requires just a 12° change in adjustment to equal 30% change of the flow. • A 360° fully open to closed valve would require 96° change in adjustment to equal the same 30% change in the flow measurement. How are balancing valves supposed to be sized? Balancing valves should never be sized based on the maximum or minimum flow rates. They should be sized using the nominal flow rate...
Easy tips

When do I need to remove the ignition tumbler Assembly?

When do I need to remove the ignition tumbler Assembly? Normally, the only time you must remove the ignition tumbler assembly is when the ignition lock no longer works because the tumblers have become jammed or have seized. Use the screwdriver to remove the screws on the sides of the steering column that hold the column cover in place. How do you get ignition Tumbler out of steering column? Pull the bottom half of the steering column cover down with your hands. Slide the pin punch into the hole at the bottom of the ignition tumbler assembly (which is now...